MidMade LUX A1120

3-section loft ladder with hatch in elegant, moulded compound. The LUX A1120's stylish finish and technological precision makes it the obvious choice for the discerning purchaser. The 3-section ladder is made from slow grown spruce and is, in closed position, accommodated on the elegant white moulded compound hatch. This, combined with the white veneered wooden frame, makes the unit a beautiful addition to most modern homes. Insulation and liner for minimum draught and heat loss. Clever gas spring balancing when opening and closing. U-value 0.54. Product Frame outer Inner Type of ladder Standard Insulation U-value* Fire measurements measurements ceiling height (W/m2 oC) standard (mm) (mm) (max mm) LUX A1120 570 x 1116 515 x 1045 3-section in wood 2650 (-3200) 50mm polystyrene 0.54 no Length adjustable to ceiling heights greater or less than 2650mm by an extension unit and cutting. The measurements of the opening in the ceiling construction are 15-20mm larger than the specified outer measurements. *U-value determination carried out by SP Technical Research Institute of Sweden. LUX 3-section loft ladder Supplied ready to fit with white surface treated frame, hatch of moulded compound, gas spring struts, 3-point lock with 800mm key and protective pads. Insulation of 50mm polystyrene and integrated plastic liner for European climates. The ladder's position on the floor in the extended position for different ceiling heights in millimetres: A: Ceiling height B: Position C: Corridor on floor measurements 2400 1255 1545 2500 1300 1545 2650 1360 1545 Accessories 1. Extension section in wood, 3-section. Applies to ceiling heights 2650-3200mm. 2. Guard rail in wood. For safer trips up to your loft. 3. Key/operation rod 1050mm. 4. Universal hand rail, in white metal. 5. LUX MidMade: PRODUCT DESCRIPTION loft ladders LUX ----------------------------------------------------------------------------------------------------------------- LUX A1120 570 x 1116 mm ceiling height 2650 mm, 3-parts timber ladder ----------------------------------------------------------------------------------------------------------------- Casing: outer size inner size size including the architrave 570 x 1116 mm 515 x 1045 mm 610 x 1145 mm White plastic casing with integrated architrave has: Case gable (on the hinge side) 38 x 145 mm Other case sides 22 x 145 mm There are 2 fitting springs mounted on each short side of the casing in order to provide easier assembling (total 4 fitting springs). Trap door: Frame rebated plastic profile Hatch surface white plastic Insulation 50 mm polystyrene. Insulation factor 0,54 W/m²Co The trap door is balanced with a gas piston. Surface treatment: Additional surface treatment is not required Fire rate: Unrated Ladder description: 3-parts fold up timber ladder is lying on the trap door and fitted within the frames of the casing. Each ladder section has 4 treads. The ladder is guaranteed for 150 kg. Ladder width (including the sides) 435 mm treads 26 x 87 mm (old model: 32 x 68 mm) ladder side 20 x 90 mm distance between the treads 242 mm Height of the fold up ladder: From the bottom of the casing (including the trap door) 349 mm Ladder only 290 mm Together with the extension the height f the fold up ladder is: From the bottom of the casing (including the trap door) 1 000 mm Ladder only 940 mm Locking: Espagnolette 440 mm long Key/handle round metal; diameter 9 mm, length 800 mm. Measurement square 7-8 mm. When ordering the extension, a longer key/handle (1050 mm) can be ordered as well. The hinges and the lock are placed on the shorter sides of the trap door. Ceiling height: Standard 2650 mm. If the ceiling is lower, the ladder shall be shortened according to the assembly instructions, while for the higher ceilings an extension can be used in order to reach maximum 3200 mm Sealing: Q-LON profile (QL-3005) is mounted between the casing and the trap door. Others: Ladders placement on the floor at the different ceiling heights (in mm): B: ceiling height C: placement on the floor D: passage Product drawing 2400 1255 1545 2500 1300 1545 2650 1360 1545 Accessories: Extension Hand rail universal Guard rail, timber Top hatch – to be ordered according to the casings outer size Weight: product weight number per pallet LUX A1120 30 kg 12

OUT OF STOCK